Thoroughly clean the surfaces to be treated (recommendation: weicon surface cleaner). If necessary, apply weicon primer G as adhesion promoter and allow to cure approx. 30-60 Minutes mix the 2- component. Add the hardener to the packaging of the resin. The 2- component are thoroughly and homogeneously mixed together. Apply the adhesive to the surface to be treated final strength is reached after 24 hours. Ready!

Weicon urethane 85 is a 2-component adhesive specially developed for the repair, touch-up and coating of all common metal parts and rubber parts such as nbr and sbr. Thanks to the elasticity of the adhesive, it can also be applied to parts that are exposed to vibration, movement, abrasion and impact. In addition, the polymer adhesive provides excellent protection against wear, ensuring that treated parts can be used | a long time without losing quality. Even better adhesion of urethane 85, weicon's specially developed primer g is recommended as an adhesion promoter.

100 % german quality, weicon urethane 85 meets the highest quality requirements in compliance with physical, safety, toxicological as well as ecological regulations.

when processing weicon products, the physical, safety-related, toxicological and ecological data and regulations in our ec safety data sheets must be observed.