Weicon GL 2-component epoxy resin system, serves as wear protection, heavily stressed surfaces and as a visual check.

Thoroughly clean the surfaces to be treated (recommendation: weicon surface cleaner), mix the 2- component, add the hardener to the resin packaging. Mix the 2- component thoroughly and homogeneously with each other. Apply the adhesive within the pot life to the surface to be treated.

The 2-component epoxy resin system is ideally suited as wear and abrasion protection due to its high abrasion resistance. It is chemical-resistant, mineral-filled and can be used wherever surfaces are exposed to permanent heavy loads. It consists of a resin and a hardener, a contour spatula, a processing spatula as well as a pair of gloves to protect the skin during processing. The epoxy repair kit can be used as wear protection on pump housings, pipes, chutes, hoppers, slide bearings, valves, pumps, castings, pipe bends and cyclones.

When processing weicon products, the physical, safety, toxicological & ecological data and regulations of the ec safety data sheets must be observed.

100% german quality, the epoxy resin 2-component adhesive meets the highest quality standards in compliance with physical, safety-related, toxicological and ecological regulations.