The very high initial adhesion and the rapid build-up of adhesive strength enable bonding even on vertical surfaces.
It replaces conventional fastening methods in the assembly of solar and photovoltaic systems.
The surfaces must be clean and free of grease (e.G. Weicon surface cleaner). Certain materials or extreme requirements, we recommend the use of an adhesion promoter (primer). Mechanical surface pre-treatment, e.G. By sanding or sandblasting, can also significantly improve adhesion. Apply with a hand-operated pressure gun for 310 ml cartridges with piston rod and automatic dispensing system (e.G. Weicon compressed air cartridge gun). To ensure optimum wetting, the bonded parts must be joined before the first skin has formed on the adhesive.
Weicon elastic adhesives and sealants have a shelf life of 12 months if stored unopened in a normal climate (+23°c and 50 % relative humidity).
When processing weicon products, the physical, safety, toxicological and ecological data and regulations in our ec safety data sheets must be observed.
100% german quality. Our adhesives meet the highest quality requirements in compliance with physical, safety, toxicological and ecological regulations.
Specifications | |
Basis | 1 K Ms Polymer |
Viscosity | Pasty |
Type of Curing | Moisture Curing |
Temperature Resistance | -40 to +90 |
In order to provide a more relevant experience for you, we use cookies to enable some website functionality. Some of the cookies are used for statistical purposes while others are set up by third party services.
By clicking "Allow", you accept the use of all the cookies on the platform. Click "Decline Non Essential" to select only strictly necessary, or "Preferences" to make more detailed choices.