- The special colour paste has been manufactured on the basis of dispersed colour pigments
- Ensures even colouring of the epoxy resin or polyurethane resin
- After setting, there is no worry of a chemical reaction that will weaken the seal
Treatment
Indication of the quantities to be added : Weicon urethane 45, 60, 80 up to approx. 8%. Weicon casting resin ms 1000 up to approx. 5%. The maximum quantities refer to the maximum weight of the mixture (resin and hardener). Mix the colour paste thoroughly and add to the polyurethane or epoxy resin. Mix again be adding the hardener. It is necessary to mix the mixture about 4 minutes with a spatula.
Storage
Store at room temperature at +20°c in a dry place. Shelf life of unopened containers at room temperature between +18°c and +25°c is min. 12 Months after delivery date.
Safety
When processing weicon products, the physical, safety, toxicological and ecological data and regulations in our ec safety data sheets must be observed.
Quality
100% german quality, the adhesive fulfils the highest quality requirements in compliance with physical, safety, toxicological and ecological regulations.
| Specifications | |
| Base | Polyol |
| Colour | Black |
| Mixture Resin Hardener | 4.29166666666667 |
| Mixture Density | 1.00 G|cm³ |
| Colour | Transparent |
Working Hours
Monday to Thursday - 8 am to 4 pm
Friday - 8:30 am till 12:30 pm
This website uses cookies.
In order to provide a more relevant experience for you, we use cookies to enable some website functionality. Some of the cookies are used for statistical purposes while others are set up by third party services.
By clicking "Allow", you accept the use of all the cookies on the platform. Click "Decline Non Essential" to select only strictly necessary, or "Preferences" to make more detailed choices.