Special fillers (glass beads) ensure a constant adhesive joint of 0.25 Mm. Maximum gap bridging: 1 mm.
It is universally applicable for static and dynamic loads. High-strength bonding is also possible with low-energy plastics such as pe or pp. Its viscoplastic setting also allows material pairings with different expansion coefficients, such as plastic, aluminium or steel.
Clean and sanitise the bonding surfaces (e.G. With weicon surface cleaner). Weicon easy-mix products can be processed directly from double cartridges with the static mixer supplied. Discard the first 5 cm of the dosed bead. Store unopened and store in normal climate (+23°c and 50 % rel. Humidity) 6 months.
When processing weicon products, the physical, safety, toxicological & ecological data and regulations of the ec safety data sheets must be observed.
100% german quality, the epoxy resin 2-component adhesive meets the highest quality standards in compliance with physical, safety-related, toxicological and ecological regulations.
Specifications | |
Maximum Gap Bridging | 1 mm |
Basis | Methyl Methacrylate |
Condition | Pasty |
Colour | Transparent |
Hand Resistant | After 60 Min |
Mechanical Resistance | After 480 Min. |
Final Hardness | After 24 Hrs. |
Temperature Resistance | -55 to +100°c |
In order to provide a more relevant experience for you, we use cookies to enable some website functionality. Some of the cookies are used for statistical purposes while others are set up by third party services.
By clicking "Allow", you accept the use of all the cookies on the platform. Click "Decline Non Essential" to select only strictly necessary, or "Preferences" to make more detailed choices.