Weicon df 175 is a patented thread sealing cord made of 100%, ptfe that seals almost all metal and plastic threads permanently and safely. Weicon df 175 reliably compensates the intermediate space on the threads and creates a ptfe film in the required thickness during the screwing procedure. This film is extremely resistant to almost all chemicals, even the most aggressive solvents, caustic agents, and acids. Weicon df 175 is non-flammable and operates reliably in a temperature range from -200°c (-328°f) to +240°c (+464°f). In contrast to other sealing materials, for which the fabric solely acts as a base for the actual sealant, weicon df 175 itself is the sealing material. A separation of the base material and the sealing material over the service life of the screw connection is thus excluded.

1 roll replaces up to 20 rolls of ptfe tape (12 mm x 0,1 mm x 12 m). "Use- wind up the sealing cord from the beginning of the pipe in direction of the thread, overlapping randomly. Make sure that enough material has been applied at the beginning of the pipe. Apply 2-3 drops of the lubricant (in the removable bottom) on the sealing thread and spread it with the fingers on the sealed area. The lubricant is harmless and biodegradable (do not use lubricant in combination with liquid oxygen).

½“ - 12 (fine thread) to 18 (coarse thread) windings 1½“- 16 (fine thread) to 24 (coarse thread) windings the number of windings must be accordingly adapted to the diameter of the pipe."