- Weicon easy-mix RK-7200 is a fast-curing, impact-resistant and solvent-free structural adhesive
- It is based on mma (methyl methacrylate) with very good adhesion to a wide range of materials
- After setting, there is no worry of a chemical reaction that will weaken the seal
Application
Due to its transparent curing it is especially suitable for bonding e.g. plastics and glass. Weicon easy-mix rk-7200 is also suitable for structural bonding where a coloured adhesive joint would disturb the overall optical impression of the component. Thus, transparent plastics such as plexiglas and other materials can be bonded cleanly and attractively with and among each other with high strength.
Processing
Clean and sanitise the adhesive surfaces (e.g. with weicon surface cleaner). Weicon easy-mix products can be applied directly from double cartridges with the static mixer supplied. Discard the first 5 cm of the dosed bead. Apply on one side.
Storage
6 months at 0°c to +4°c, 3 months at 20°c to +25°c safety: When processing weicon products, the physical, safety, toxicological & ecological data and regulations of the ec safety data sheets must be observed.
Quality
100% german quality, the epoxy resin 2-component adhesive meets the highest quality standards in compliance with physical, safety-related, toxicological and ecological regulations.
| Specifications | |
| Basis | Methyl Methacrylate |
| Colour | Transparent |
| Hand Strength | After 8 Min |
| Mechanical Resistance | After 120 Min |
| Final Hardness | After 6 Hrs. |
| Temperature Resistance | -40 to +120°c |
This website uses cookies.
In order to provide a more relevant experience for you, we use cookies to enable some website functionality. Some of the cookies are used for statistical purposes while others are set up by third party services.
By clicking "Allow", you accept the use of all the cookies on the platform. Click "Decline Non Essential" to select only strictly necessary, or "Preferences" to make more detailed choices.