- The liquid epoxy resin adhesive is mineral-filled, temperature resistant up to +180°c
- Resistant to zirconium silicate filled, chemical resistant, wear and abrasion resistant
- Suitable for lining heavily loaded pump housings, as wear protection, slide bearings, slides, funnel
- Quality - 100% german quality - the product fulfils the highest quality requirements In compliance with physical, safety, toxicological and ecological regulations
Properties
The high-viscosity polyurethane-based adhesive is fast-curing, high-strength and bonds fibre composites, plastics, polyurethane, epoxies, polyester, metal, wood and ceramics.
Application
The adhesive bonds numerous materials such as fibre composites, plastics, polyurethane, epoxies, polyester, metals, wood and ceramics to and among each other with high tensile, shear and peel strength.
Processing
A prerequisite for perfect bonding is clean and dry bonding surfaces (e.G. Cleaning and degreasing with weicon surface cleaner). Weicon easy-mix products can be applied directly from double cartridges with the static mixer supplied. Discard the first 5 cm of the dosed bead. The adhesive is applied on one side. Higher strengths can be achieved by further pretreatment of the surfaces. Some low-energy plastics can only be bonded after special pre-treatment of the surfaces by e.G. Fluorination, low-pressure plasma, corona, flame treatment or similar.
Storage:
In unopened condition and storage at normal climate (+23°c and 50% rel. Humidity) 9 months shelf life.
Safety
When processing weicon products, the physical, safety, toxicological & ecological data and regulations of the ec safety data sheets must be observed
Quality
100% german quality, the product fulfils the highest quality requirements In compliance with physical, safety, toxicological and ecological regulations.
| Specifications | |
| Included Components | Weicon Fibreglass Tape 50mm, Weicon Processing Spatula Short / Long, Weicon Stirring Rod Stainless Steel |
| Base | Polyurethane |
| Properties | High Viscosity |
| Colour | Black |
| Pot Life | 240 Sec. |
| Hand Dry | After 10 Min. |
| Mechanical Resistance | After 30 Min. |
| Final Hardness | After 12 H. |
| Temperature Resistance | -55 to +125°c |
This website uses cookies.
In order to provide a more relevant experience for you, we use cookies to enable some website functionality. Some of the cookies are used for statistical purposes while others are set up by third party services.
By clicking "Allow", you accept the use of all the cookies on the platform. Click "Decline Non Essential" to select only strictly necessary, or "Preferences" to make more detailed choices.