Specially designed for the economical locking, fastening and sealing of screws, nuts and threads. Weiconlock an 302-75 has a high viscosity and high strength. The pipe and thread seal can be dismantled normally and is suitable as vibration protection for coarse threads. The dispensing tip and the weicon pen system make the adhesive easy to dose and achieve manual strength after 15-25 minutes.
Weiconlock is applied evenly directly from the pen with the dosing tip to avoid direct contact between dosing tip and metal. Apply weiconlock annularly on the thread. Then assemble and tighten the parts. Do not pour weiconlock back into the bottle if it has already come into contact with metal. Even the smallest metal particles will cause curing in the bottle. In series production, the use of dosing units is there|e recommended.
Weiconlock can be stored for at least 24 months at room temperature in the original sealed containers. Avoid heat
When processing weicon products, the physical, safety, toxicological and ecological data and regulations in our ec safety data sheets must be observed.
100% german quality, the weiconlock meets the highest quality standards in compliance with physical, safety, toxicological and ecological regulations.
Specifications | |
Available Colours | Green |
Available Sizes | 50 Ml, 200 Ml |
Fluorescent | Yes |
Manual Strength at Room Temperature | 15 - 30 Min |
Final Strength at Room Temperature | 3-6 Hrs |
Temperature Resistance | -60 to +150 °c. |
In order to provide a more relevant experience for you, we use cookies to enable some website functionality. Some of the cookies are used for statistical purposes while others are set up by third party services.
By clicking "Allow", you accept the use of all the cookies on the platform. Click "Decline Non Essential" to select only strictly necessary, or "Preferences" to make more detailed choices.