It protects metals against rust and corrosion and dries fastly and adheres firmly. The spray is resistant to salt and fresh water and temperatures up to approx. +300 Celsius (+572 fahrenheit). In the salt spray test according to din en iso 9227, metal parts coated with galva spray showed no corrosion even after more than 450 hours. The spray is used to repair damaged zinc coatings in the same shade, as a high-quality rust protection primer, example paintwork on car bodies, coating welding and drilling areas and as a conductive intermediate layer during spot welding.
In the salt spray test according to din en iso 9227, metal parts coated with galva spray did not show any corrosion even after more than 450 hours.
Clean and degrease the surfaces with weicon surface cleaner.
Shake can be use until stirring ball is clearly audible. Spray evenly in a cross-coat at room temperature (approx. +20 Celsius) at a distance of approx. 25 Cm. Dust dry after approx. 15 Min., Fully cured in approx. 10-12 Hours.
Container is under pressure. Protect from sunlight and temperatures above +50 celsius.
100% german quality, the products meet the highest quality standards In compliance with physical, safety, toxicological and ecological regulations.
Specifications | |
Binder | Acrylic Resin Pigment Zinc and Aluminium Pigments |
Metal Content in Dry Film | approx. 51 % |
Recommended Primer | Zinc Spray |
Application Temperature | 5 to +35 C |
Optimally | 18 to +25 celsius |
Dust Dry After | 15 Min |
Fully Hardened After | 12 Hour |
Recoatable After | 12 Hour |
Storage Stability | 24 Months |
Temperature Resistance | -50 to +300 Celsius |
In order to provide a more relevant experience for you, we use cookies to enable some website functionality. Some of the cookies are used for statistical purposes while others are set up by third party services.
By clicking "Allow", you accept the use of all the cookies on the platform. Click "Decline Non Essential" to select only strictly necessary, or "Preferences" to make more detailed choices.