Our GMK 2410 is an adhesive based on polychloroprene (CR) with a high initial adhesion | full-surface and flexible bonding of rubber with rubber or rubber with metal. GMK 2410 also bonds foam rubber, PE foam, leather, felt, insulating materials, textiles, wood and many plastics. Weicon GMK 2410 is not suitable for materials such as polystyrene foam, polyethylene, polypropylene parts, PVC soft foam and PVC artificial leather. The parts to be joined must be clean, dry and free of dust and grease (Weicon Surface Cleaner).

By roughening the surfaces, the strength of the bond is effectively increased. Stir the products well be|e use and then apply evenly with a brush or spatula (smooth or fine-toothed) to the surfaces to be bonded, thinly and over the entire surface. Depending on the type of material and application, two to three thin layers may be required.

Depending on application thickness, ambient temperature and humidity, allow the coated surfaces to flash off for 5 - 10 minutes. In the case of absorbent surfaces (e.g. felt), a further application of adhesive should be carried out after flash-off.

As soon as the surfaces feel dry but still slightly sticky (finger test), the parts must be joined under short, strong pressure (e.g. with a roller or hammer). If the flash-off time is exceeded (over-drying), a new application of adhesive is necessary. For additional information regarding the product, please contact with dubuy support team.