- The 2-component adhesive is especially suitable for the quick repair, touch-up and coating
- The elastic adhesive can be used on rubber mats, stable mats, rubber rollers
- Repair kits consist of numerous products that are needed in a wide variety of situations
Application
Thoroughly clean the surfaces to be treated (recommendation: weicon surface cleaner). Roughen surface and remove sanding dust. Apply weicon primer g as adhesion promoter and allow to cure approx. 30-60 Minutes. Place mixing nozzle on the cartridge. Apply adhesive to the surface to be treated using a dispensing gun, fill the material. Reworking possible after approx. 8 Hours.
Properties
The belt repair kit contains, among others, weicon urethane 85 2-component adhesive, which has been specially developed | the repair, touch-up and coating of all common metal parts and rubber parts such as nbr and sbr. Weicon primer G is recommended the pre-treatment of the surface. This serves as an adhesion promoter and ensures an even stronger adhesive strength of the pu adhesive. Thanks to the elasticity of the adhesive, it can also be applied to parts that are exposed to vibration, movement, abrasion and impact. In addition, the polymer adhesive provides excellent protection against wear, ensuring that treated parts can still be used a long time without losing quality.
Safety and Health
When processing weicon products, the physical, safety, toxicological and ecological data and regulations in our ec safety data sheets must be observed
Quality
100% german quality, the products meet the highest quality standards In compliance with physical, safety, toxicological and ecological regulations.
| Specifications | |
| Included Components | 2-component Adhesive in a Cartridge, a Mixing Nozzle, a Contour Spatula, a Processing Spatula and a Pair of Gloves to Protect the Skin During Processing |
| Consistency | Pasty |
| Pot Life at +20 °c | 20 Minutes |
| Final Hardness After | 24 Hours |
| Temperature Resistance (Wet) | -60 °c to +60 °c |
| Temperature Resistance (Dry) | -60 °c to +100 °c |
This website uses cookies.
In order to provide a more relevant experience for you, we use cookies to enable some website functionality. Some of the cookies are used for statistical purposes while others are set up by third party services.
By clicking "Allow", you accept the use of all the cookies on the platform. Click "Decline Non Essential" to select only strictly necessary, or "Preferences" to make more detailed choices.