- Rapp-it is the Ultimate Pipe Repair System for your temporary emergency pipe repair needs.
- It is simple to use, with no mixing or measuring required.
- A successful pipe repair can be achieved in only 30 minutes.
Rapp-it Pipe Repair System includes a woven fibreglass bandage impregnated with a water-activated polyurethane resin, a 90mm stick of Rapp-it Steel Putty and a pair of longer, premium nitrile gloves.
Rapp-it Steel Putty is a hand-mixable, steel-reinforced epoxy putty that can be moulded into any shape to fill cavities, cracks or holes for a strong, successful repair.
Rapp-it can be used on all types of pipes including polypipe (PP / HDPE), GRE, ABS, steel, PVC, rubber, concrete, galvanised, ceramic, clay, stainless steel, basalt, fibreglass, copper and all insert piping. It can be applied on cracked, fractured, damaged and leaking pipes; around straight lengths and difficult shapes like tee and elbow joints, y pieces, couplings and clamps. Rapp-it is suitable for use on wet or dry pipes. It can even be applied underwater, in fresh or salt water.
Rapp-it is a wholly Australian owned and operated company with 30 years’ industry experience and has been awarded with NATO Certification for stringent quality assurance.
| RAPP-IT Pipe Repair Bandage Specifications | |
| Resin Makeup | Water-activated polyurethane |
| Heat Resistance | 150°C (300°F) |
| Pressure Resistance | Internal Pressure up to 2500kPA (360psi) |
| Bonding Pipes | Steel, Polypipe, PVC, Fibreglass, Copper |
| Set Time | 30 minutes |
| Chemical, Fuel & Oil Resistant | Acid lines, Oils, Gas, Sea Water and CHPP |
| Size | 10cm x 3.6m |
| RAPP-IT Steel Putty Specifications | |
| Shore D Hardness at Full Cure (24 hours) | 80 |
| Lap Shear Tensile Strength | On steel (1” x 1” x 1/16”) 400kg (6.2MPa) |
| Compressive Strength | 8,000 psi (55 MPa) |
| Temperature Limits | Continuous -40° to 250°F (-40° to 121°C) ; Intermittent -40° to 300°F (-40° to 149°C) |
| Work Life | 2 to 5 minutes; Tenacious bond after 5 to 10 minutes |
| Functional Cure Time | Approximately 30 minutes |
| Chemical Resistance | Rapp-it Steel Putty is resistant to hydrocarbons, ketones, esters, alcohols, halocarbons, aqueous salt solutions, dilute acids, and dilute bases. |
This website uses cookies.
In order to provide a more relevant experience for you, we use cookies to enable some website functionality. Some of the cookies are used for statistical purposes while others are set up by third party services.
By clicking "Allow", you accept the use of all the cookies on the platform. Click "Decline Non Essential" to select only strictly necessary, or "Preferences" to make more detailed choices.