Simply clamp carboy handle to the carboy neck and you're set! Carboy handles helps decrease the chances of breaking carboys and prevents unnecessary spills during transportation. Carboy handles are often used by hobbyist - from winemakers to employees at wineries. These handles fit around the lip of glass carboys. They make an empty carboy easier to carry (especially when wet). Clamps beneath lip and reduces the danger of dropping a wet carboy the carboy handle is made of stainless steel, and a silicone protective layer is added to the surface, which is durable and non-rusting. The surface of the silicone coating is smooth and comfortable to hold and prevent glass from scratching, which is not easy to hurt your hands or damage the mouth of carboy.The middle of the glass carboy handle for smooth neck is connected by a butterfly nut, which can be adjusted according to the width of the neck of the jar when in use. Carboy handle can be easily to carry 3/5/6/6.5 Gallon empty glass carboys with one hand when installed properly.

Easy to install: carboy handle for smooth neck must be installed below the second ring on the neck of the carboy. The wing-nut and screw should be fully removed prior to installation so the handle can be expanded to fit around the second ring, and then only tightened enough to ensure firm contact. Carboy handle is a very convenient home brewing wine making jar handling accessory, easy to hold carboys, especially when it’s wet & slippery, carboy handle with wingnuts no need to spend a lot of effort to install the strap or find a cart to carry. After installation, you can lift the carboy with one hand easily tips: carboy handles are not meant to support the weight of a full carboy; the neck of the carboy could break. Always carry a full carboy by supporting it from the bottom.For additional information regarding the product, please contact with DuBuy support team.