Honeywell’s fast-acting, two-position actuators are line volt (230v), 80 lb-in., spring return direct coupled actuators (dca) for fire and smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (spst) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation. An actuator is a device that produces a motion by converting energy and signals going into the system. The motion it produces can be either rotary or linear. An actuator requires a control signal and a source of energy.
The control signal is relatively low energy and may be electric voltage or current, pneumatic, or hydraulic fluid pressure, or even human power. When it receives a control signal, an actuator responds by converting the source's energy into mechanical motion. In the electric, hydraulic, and pneumatic sense, it is a form of automation or automatic control. For additional information regarding the product, please contact with dubuy support team.
|Frequency||50 Hz; 60 Hz|
|Supply Voltage||230 Vac ±10%|
|Power Consumption||Driving– 0.13A, 23W, Holding– 0.09A, 7W|
|Shipping and Storage Temperature Range (C)||-40 C to +60 C|
|Ambient Temperature Range (C)||-18 C to +55 C|
|Stroke||95 ±3 Degrees|
|Torque Rating (lb-in.)||80 lb-in.|
|Operating Humidity Range (% RH)||5 to 95% Rh, Non-condensing|