This fulfils the requirements of din en iso 1461 and protects the surface from moisture penetration for longer. In combination with the simultaneous electrochemical effect, optimum corrosion protection is achieved.

Clean and degrease material surfaces. The coating should be applied at the latest one hour after pre-treatment. Keep temperature differences between the surface and the air as low as possible to avoid condensation. Bring the containers to room temperature and stir up the sediment well. Apply the protective paint evenly with a brush, roller or spray gun. Stir regularly during application to ensure that the active substance remains homogeneous. High application temperatures up to max. +30°C and low humidity favour an even spreading pattern and an optimal surface structure.

Keep away from sources of ignition do not smoke. Take measures against electrostatic charge. Keep tightly closed in original packaging. Do not store together with flammable substances. Keep container in a cool, well-ventilated place. Protect from heat for overheating.

When processing weicon products, the physical, safety, toxicological and ecological data and regulations in our ec safety data sheets must be observed.

100% german quality. Our adhesives meet the highest quality requirements in compliance with physical, safety, toxicological and ecological regulations.